CONNECT Edition V9 Update 7.1

• Designing Combined footings to the Canadian Concrete Code A23.3 2019 Edition in the General Mode
• Reinstatement of design of combined footings for load cases that cause a partial loss of contact
• Seismic and Wind load generation per PIP STC01015 April 2017 - Vertical Vessel on pilecap foundations

CONNECT Edition V9 Update 7

• Seismic Load Generation per PIP STC01015 April 2017
• Design of Pilecaps per the Canadian Concrete Code A23.3 2019 Edition in the General Mode

CONNECT Edition V9 Update 6.1

• Isolated Footings per Canadian A23.3 2019 in General & Toolkit modes
• Mat Design per Canadian A23.3 2019 Code in General mode
• Punching shear check for foundations for the Indian Code

CONNECT Edition V9 Update 6

General mode and Toolkit mode

• Design of isolated footings to the 2019 edition of Canadian A23.3
• Service load checks: soil pressure, contact area, stability (sliding & overturning), uplift
• Ultimate load checks: flexure, one-way shear, development length, two-way shear, bearing
• Checking the adequacy of user-defined footing sizes
• Determination of optimum footing sizes

General mode

• Design of mat foundations to the 2019 edition of Canadian A23.3
• Creation of the mat physical model - geometry, loads, soil springs, pile springs
• Mesh generation and creation of a FE (analytical) model
• Analysis using the STAAD.Pro Analysis engine
• Soil pressure, contact area and stability check reports
• Design for flexure, creation of reinforcement zones based on moments from the FE analysis
• Design for punching shear

Refer to the STAAD Foundation Advanced help for details and a list of other, minor enhancements and bug fixes.